About this product
The Battery Monitor is capable of measuring one (1) Current, two (2) DC Voltages, and up to four (4) individual battery temperatures. The Battery Monitor Cable Harness (P/N A2225-[], see Table 1 and 2) enables the monitor to connect to the batteries. The Battery Shunt 200 Amp, 50mV (P/N MS91587-2), is needed to measure the current that is installed on the high side of the installation. The Battery Monitor is NMEA 2000® certified, allowing the user to view all DC information over an NMEA 2000 network.
DC Voltage Input | 12 VDC – 30VDC (Red Wire) |
Shunt Voltage | 50 mVDC (Orange/Green Wires) |
CAN Bus Voltage | +15 VDC (± 0.5) |
Load Equivalence Number | 1 |
Dimensions | 5.50” X 2.43” X 2.43” |
CAN Bus Connectors | One (1) Micro-C Male |
Operating Temperature | -40°C to +70°C |
Weight | 0.75 lbs (0.34 kg) nominal |
NMEA 2000 | Category B |
CE | IEC 60533 Electrical and Electronic Installations in Ships |
Configurit (Build a Part)
Use this easy to use tool to build a complete part number by selecting features that fit your application, with access to datasheets, CAD models, and sales drawings.
eParts (Find a Part)
Search and compare standard part numbers. Each switch, circuit breaker, and control category includes parametric filters to help you narrow results based on the features that match your specifications.
Request Sample
Fill out the sample request form to order a product sample. Test performance, fit, and compatibility to ensure the right solution before committing to a full order.