Eco-Friendly

CKJ-Series

Product Type:

Jog Switch

Description:

The CKJ-Series jog switch features a joystick rotary encoder with push-to-select button and 5 customizable function buttons with dimmable lighting. This CAN J1939 compatible display controller is sealed to IP67 standards and can be configured in a variety of orientations providing simple installation and connectivity.

The jog switch buttons allow for quick access to the five customizable functions with illumination options in white, green, yellow, blue & red. Use the rotary encoder to scroll through the display and then push-to-select the function or chose to navigate the display more quickly by using the integrated joystick and then push-to-select the function. Watch product video below for a full navigation demonstration.

View Similar Products »
  • CKJ-Series jog switches with rotary encoder- a customizable and CAN J1939 compatible vehicle display controller.
  • CKJ-Series jog switches with rotary encoder- a customizable and CAN J1939 compatible vehicle display controller.
CKJ-Series jog switches with rotary encoder- a customizable and CAN J1939 compatible vehicle display controller.
CKJ-Series jog switches with rotary encoder- a customizable and CAN J1939 compatible vehicle display controller.
CKJ-Series jog switches with rotary encoder- a customizable and CAN J1939 compatible vehicle display controller.

Specs

Operating Voltage

Designed for 12/24 VDC systems
(8 minimum, 32 VDC maximum

Electrical Endurance

Keypad Buttons: Up to 500,000 cycles
Knob Push: Up to 500,000 cycles
Knob Directional Joystick: Up to 500,000 cycles in each of four directions
Knob Rotation: Up to 500,000 cycles, one cycle is 360 degrees

Switch Functions

5 keypad buttons
Knob push
4-directions knob joystick (optional)
Continuous rotary knob (20 detents per rotation)

Illumination

LED backlit icon
Dimmable illumination
Controlled by CAN messages

Mounting

M5 back screw mounting

Sealing

IP67, for above panel components of actual switch only

Operating Temperature

-40 degrees C to +85 degrees C

Solar Radiation

IEC 60068-2-5
Procedure B
24h per cycle, 20h irradiation and 4 darkness
total irradiation of 22.4kWh/m2 per diurnal cycle
15 cycles

Chemical Resistance

ISO 16750-5
Method II (Brushing) for engine oil, hydraulic oil, diesel fuel, grease and urea at room temperature for 24 hours

Thermal Cycling

IEC 60068-2-14
Test Nb
-40 degrees C to +85 degrees C
dwell: 3 hours
transfer rate:(3±0.6 degrees C)/min
2 cycles

Shock and Bump

IEC 60068-2-27
3 shocks in each direction of the 3 axis (18 total shocks)at 500 m/s2 for 11 ms
100 shocks in each direction for the 3 axis (600 total shocks) at 400 m/s2 for 6 ms

Additional specifications

View data sheet for complete specifications

Resources

Applications

Commercial Vehicles
Construction Equipment
Agricultural Equipment
Work Trucks
Back to Top